To get started, you will first need to have a licence to install Windows 10. You can then download and run the media creation tool. For more information on how to use the tool, see the instructions below.
Usb Boot Driver Download
Note: Before you install Windows 10, check to make sure your PC meets the system requirements for Windows 10. We also recommend going to the PC manufacturer's website for any additional info about updated drivers and hardware compatibility.
If your PC does not automatically boot to the USB or DVD media, you might have to open a boot menu or change the boot order in your PC's BIOS or UEFI settings. To open a boot menu or change the boot order, you'll typically need to press a key (such as F2, F12, Delete, or Esc) immediately after you turn on your PC. For instructions on accessing the boot menu or changing the boot order for your PC, check the documentation that came with your PC or go to the manufacturer's website. If you do not see the USB or DVD media device listed within the boot options, you may need to reach out to the PC manufacturer for instructions for temporarily disabling Secure Boot in your BIOS settings.
If changing the boot menu or order doesn't work, and your PC immediately boots into the OS you want to replace, it is possible the PC had not fully shut down. To ensure the PC fully shuts down, select the power button on the sign-in screen or on the Start menu and select Shut down.
If you downloaded an ISO file for Windows 10, the file is saved locally at the location you selected. If you have a third-party DVD burning program installed on your computer that you prefer to use for creating the installation DVD, that program might open by going to the location where the file is saved and double-clicking the ISO file, or right-click the ISO file, select Open with and choose your preferred DVD burning software.
Boot Camp requires a Mac with an Intel processor. When you install Microsoft Windows on your Mac, Boot Camp Assistant automatically opens the Boot Camp installer, which installs the latest Windows support software (drivers). If that doesn't happen, or you experience any of the following issues while using Windows on your Mac, follow the steps in this article.
After downloading the Windows support software to your flash drive, follow these steps to install the software. (If you're attempting to resolve issues with a Bluetooth mouse or keyboard, it might be easier to use a USB mouse or keyboard until these steps are complete.)
Universal USB Installer (Imager) aka UUI is a Live Linux Bootable USB Creator Software. This ISO to USB imaging tool allows users to easily Boot from USB. Make a flash drive boot from a Live Linux distribution, Windows Installer, or fully Install and Run Windows 10 or 11 from USB using Windows to Go methods. Popular Antivirus Scanners, Disk Cloning software or other System tools can also easily be made to run from the removable media.
Another key feature of UUI is the use of persistent storage, where available. This persistence feature allows you to save some changes and then restore them on subsequent boots. Ubuntu based Casper persistence works with FAT32 or NTFS formatted drives. An option to use a larger than 4GB casper-rw or live-rw persistent block file, (also known as an overlay image) is possible when the drive is formatted with an NTFS filesystem.if(typeof ez_ad_units!='undefined')ez_ad_units.push([[336,280],'pendrivelinux_com-medrectangle-4','ezslot_8',189,'0','0']);__ez_fad_position('div-gpt-ad-pendrivelinux_com-medrectangle-4-0');
NOTE: If you are looking to add multiple Live Linux distributions, System Diagnostic Tools, Antivirus Utilities, and Windows Installers, you should use YUMI Multiboot Software, instead. As a multisystem tool can help you Boot Multiple ISO files from one flash drive.
The tool expects the Volume Label of your device to be UUI in order for OpenSUSE, CentOS and a few other distributions to boot. It does attempt to automatically create this Label, but may fail. So make sure it remains UUI in order to allow those distributions to boot.
Older flash drives shipped USB-FDD formatted and some systems will not boot USB-FDD. However, I have found that most systems can boot USB-ZIP, and or USB-HDD. If you are having a hard time getting your BIOS to detect your flash drive, reformat it. Then try again to see if your BIOS can detect and boot from it.
For those curious, it's possible to use a Mac to create a Windows 10 boot drive, but the process is fairly involved and requires familiarity with Terminal, the Mac's command-line tool. It's not a process that I'd recommend for the average user. I recently built my first gaming PC, and despite my mild comfort level with Terminal, I still found using a Windows computer to be a safer and easier process.
2. Once the download finishes, double-click the file called MediaCreationToolxxxx to run it. (The last four digits of the file name indicate the version number of Windows 10. Right now, the filename is MediaCreationTool21H1, but that will change as newer versions are released.) The file should be in your Downloads folder.
4. You'll be asked to select the language, edition and architecture you want to use. By default, the tool will use the best options for the PC you're creating the boot drive on. You can change any of the options by unchecking the box next to Use the recommended options for this PC and using the drop-down options. If you're unsure about whether you need a 64-bit or a 32-bit architecture, select Both from the Architecture drop-down.
When the tool is done, click Finish and remove the USB drive from your computer. Going forward, if you need to install or reinstall Windows, you can connect the drive to your computer and reboot it. Your PC should boot to the drive, giving you the option to install Windows.
If it doesn't automatically boot to the drive, you'll need to reboot your computer into its BIOS firmware -- usually done by pressing Esc, F2, or a similar key while the computer is starting up -- and change the boot drive or "bootmenu" to your flash drive. The process for each computer (or motherboard if you're building a gaming PC) will be different. When you first turn on your computer, there'll be a small line of text telling you which button to press to enter BIOS. If you don't see it, or it goes away too fast, I suggest consulting your manual for instructions.
Recently I came across a problem when attempting to install Windows 7 onto a Dell Precision 7710. I would boot up with a DVD that had an .iso image of Windows 7 installed on it, but when after clicking the install windows button, I would get a notice that the installer couldn't locate the CD/DVD driver and I needed to browse to locate it. Well, I thought I would be smart and instead do the install via a USB device. Same error. Well, how does this make sense? It's asking for a DVD driver when using a USB device. That's like your car throwing a CEL for the carburetor not working when you're using fuel injection.
This issue is caused because the installer media doesn't have a driver to install through a USB 3.0 port. You might ask, well why did the DVD drive throw the error? Well, that's because the DVD drive was an external because there is no internal DVD drive on this model laptop. So I now know my problem. USB 3.0 drivers need to be added to the boot media. Follow this guide and I'll show you how to accomplish this using the CMD line and the DISM utility.
First thing you're going to do is to download the USB drivers from either your computer's manufacturer or from your motherboard's manufacturer. With the Dell Precision 7710 I went to , punched in my service tag number and proceeded to download an entire driver pack in .CAB format.
Depending on the type of file you downloaded, it could be an .exe, a .cab, or a .zip, so you'll need to unzip the drivers out of this file. Driver files are historically mainly .inf files, but you don't need to pick and choose the individual files because this next process makes it automatic for you. The DISM (Deployment Image Servicing and Management Tool) is smart and will automatically grab the correct files.
1. Create a folder on your desktop named 'Drivers'.2. Create two folders inside of the 'Drivers' folder, 'mount' and 'USB'.3. Extract or copy/paste the driver files directly into the 'USB' folder. I used 7-zip to extract my driver files directly into the 'USB' folder.
dism /mount-wim /wimfile:boot.wim /index:2 /mountdir:mountExplanation: This command mounts the boot.wim file, index points it to the correct boot parameters for the correct OS, and /mountdir:mount points it to mount the file to the 'mount' folder we created in this directory earlier.
dism /image:mount /add-driver:"USB" /recurseExplanation: This command automatically grabs the driver files that it locates in the 'USB' folder that we created earlier and copied the drivers to. This can take a while depending on the number of driver files that it locates.
This process wasn't necessary on the 'boot.wim' file, but it is in the 'install.wim' file. Each version of Windows can have a specific index number and we will need to locate which one it is in order to issue the command for the version of Windows you plan on installing. This is specific to the install media you are using because some install media only comes with one version of Windows 7, such as Professional, but some others may have multiple version of Windows 7, such as Home, Ultimate and Professional, just to name a few.
Wait for the transfer to finish. This is going to take a little bit longer to copy back over to the flash drive because the files going back in are larger than they were before due to the driver files that you've added to it.
It doesn't work for me yet. In my version I have unlocked all of the versions, starter to ultimate. I chose to mount it to proff. But when i boot, I never get as far as to choose which windows version I want, before the message: Missing CD/DVD comes. 2ff7e9595c
Comments